by Productions | Oct 3, 2020 | Bridge Decks, Commercial/Industrial Slab on Ground, Exterior Commercial Slab on Ground, Exterior Heavy Industrial Slab, Interior Commercial Slab on Ground, Interior Heavy Industrial Slab on Ground, Macro, Macrosynthetic, Paving & Overlays, Shotcrete, State DOT
FiberForce 650 General Information FiberForce 650 is a macro synthetic fiber developed from a specific blend of polypropylene and polyethylene resins that possess unique engineering properties. Defined as a tape or ribbon fiber, FiberForce 650 has a rectangular...
by Productions | Oct 3, 2020 | Bridge Decks, Commercial/Industrial Slab on Ground, Composite Metal Deck, Exterior Commercial Slab on Ground, Exterior Heavy Industrial Slab, Interior Commercial Slab on Ground, Macro Blends, Macrosynthetic, Paving & Overlays, Precast, Shotcrete, State DOT, Topping Slabs
FiberForce 750 General Information FiberForce 750 is a blend of macro synthetic fibers. FiberForce 750 combines a mechanically embossed tape macro fiber with a modified fibrillated macro fiber. The modified fibrillated portion has been engineered so the main fibrils...
by Productions | Oct 3, 2020 | Bridge Decks, Commercial/Industrial Slab on Ground, Composite Metal Deck, Exterior Commercial Slab on Ground, Exterior Heavy Industrial Slab, Interior Commercial Slab on Ground, Interior Heavy Industrial Slab on Ground, Macro, Macrosynthetic, Paving & Overlays, Precast, Shotcrete, State DOT, Topping Slabs, Tunnel Lining
FiberForce 1000 HP General Information FiberForce 1000 HP is a macro synthetic concrete fiber developed from a specific blend of polypropylene and polyethylene resins that are continuously embossed for enhanced bond. FiberForce 1000 HP has an optimized embossment...
by Productions | Aug 21, 2020 | Commercial/Industrial Slab on Ground, Exterior Heavy Industrial Slab, Interior Commercial Slab on Ground, Interior Heavy Industrial Slab on Ground, Steel, Tunnel Lining
FiberForce T1-60 General Information FiberForce T1-60 is a cold-drawn steel wire fiber which meets the requirements of ASTM A820 Type I. FiberForce T1-60 was developed for use as temperature-shrinkage reinforcement and post-first crack toughness in concrete....
by Productions | Aug 21, 2020 | Exterior Heavy Industrial Slab, Interior Heavy Industrial Slab on Ground, Steel, Tunnel Lining
FiberForce T5 General Information FiberForce T5 is a modified cold-drawn steel wire fiber, which meets the requirements of ASTM A820 Type V. The continuouslydeformed Type V steel fiber also meets the requirements of ASTM C1116, Section 4.1.1. Technical Data Sheet...