FiberForce T1-60 is a cold-drawn steel wire fiber which meets the requirements of ASTM A820 Type I. FiberForce T1-60 was developed for use as temperature-shrinkage reinforcement and post-first crack toughness in concrete. FiberForce T1-60 has been manufactured with hooked ends to enhance interlock within the concrete mix. Data can be made available to provide evidence of the high level of performance available at all addition rates typical to the use of FiberForce T1-60.
FiberForce T1-60 is packed in bags that are NOT degradable. Bags must be manually opened and dispersed at a uniform rate into concrete anytime during or after the concrete is batched. Mix for 5 minutes at full charging speed (75-100 revolutions) to ensure complete dispersion of fibers. FiberForce recommends the utilization of the appropriate water-reducing chemical admixture for any slump or workability modification that may be required with this technology.